Bathtub Doors
Bathtub doors are the awkward middle child of shower glass. They have to mount on a short wall, reach across a tub that wasn't designed with glass in mind, and give you enough clearance to actually get in without knocking your shin on the rim. The hardware for it is different from every other category we sell.
What Makes Tub Doors Different
A standard shower door mounts to a curb, which is a flat surface the same height as the tile floor. A bathtub door mounts to the top rail of a bathtub, which is typically higher, narrower, and much less forgiving. The glass has to sit on a header that spans the full width of the tub, and the bottom edge needs a seal that works against the porcelain or acrylic surface of the tub itself.
That's why you can't just order a regular shower door for a tub install. The header profiles, the bottom seals, and the bracket hardware are all tub-specific. We cut and configure them differently from the start.
Sliding vs. Swinging Tub Doors
Sliding is the older, more common layout: two panels of glass that bypass each other on a top and bottom track. Opening one side lets you into that half of the tub; opening the other lets you into the other half. This is what you see in most 1990s bathrooms that still have their original glass.
Swinging tub doors are the newer, cleaner option. You get one or two hinged panels mounted on a header that spans the tub rim, and they swing outward the way a regular shower door does. It's a better look and a better shower experience, but it only works if your bathroom has room for the door to swing without hitting a vanity or a toilet.
If your tub is in an alcove with a wall three feet away, swinging works fine. If the alcove is tight or the tub sits right next to a vanity, stick with sliding. Mixing up this decision is the most common regret we hear from homeowners a year after installation.
Dual Sliding, Single Slider, or Double Swing
Our sliding tub doors come in two configurations. The dual sliding version gives you two bypass panels that both move along the track, which is the traditional layout and works for any standard-width tub. The single slider pairs one moving panel with one fixed panel — the door slides against the fixed panel and you step in through the opening. Single sliders feel more modern and use fewer tracks, which means less hardware showing.
Double swinging doors are the premium option. You get two hinged panels that both swing out from the middle, effectively doubling your entry opening. It's the right call for bathrooms used by multiple people or for tubs that serve as both a bath and a shower.
Glass Height for Tub Doors
Bathtub doors are almost always shorter than regular shower doors, because they only need to cover the shower-head portion of the tub. A typical tub door runs 58 to 66 inches tall measured from the rim of the tub. That's enough to keep spray off the bathroom floor without creating a giant wall of glass.
If your tub has an unusually high rim (some modern soaking tubs sit 22 inches off the floor or more), factor that into the total height measurement your contractor provides. The glass height is measured from the tub rim up, not from the bathroom floor up.
Seals and Splash Control
Seals matter more on tub doors than they do anywhere else. A shower floor is pitched toward a drain, so small amounts of escaping water just run back in. A bathtub rim is flat, and any water that gets past the seal ends up on the bathroom floor. We ship every tub door with the appropriate bottom seal and side jamb gaskets, but they need to be installed correctly and replaced every few years as they wear out.
That's also why we recommend the glass protection coating on tub doors more often than on regular showers — the coating makes water bead up and run down the glass face instead of clinging to the bottom edge where it can find its way past the seal.
This Shipping Policy explains production timelines, shipping methods, customer responsibilities, freight inspections, and damage reporting requirements.
Overview
Custom Shower Glass Doors ships custom-manufactured shower glass products throughout the United States. Because our products are custom-built, oversized, and fragile, shipping procedures differ from those used for standard parcel shipments.
This Shipping Policy explains production timelines, shipping methods, customer responsibilities, freight inspections, and damage reporting requirements.
Production Time
Most products are custom manufactured after your order is placed.
Estimated production times vary depending on:
- Product type
- Glass thickness
- Hardware finish
- Manufacturing capacity
- Material availability
- Holidays
Estimated production times are not guaranteed.
Production may begin immediately after your order is approved.
Shipping Methods
Orders may be shipped using:
- LTL (Less-Than-Truckload) Freight
- Dedicated freight carriers
- Regional freight providers
- White-glove delivery (where available)
- Local pickup (when offered)
The shipping method is determined by product size, weight, destination, and carrier availability.
Shipping Charges
Shipping charges are calculated during checkout based on factors including:
- Destination
- Product size and weight
- Freight class
- Residential or commercial delivery
- Liftgate service (if required)
- Limited-access delivery locations
Additional fees imposed by the carrier after shipment may be the responsibility of the customer if caused by inaccurate delivery information or special delivery requirements.
Estimated Delivery Dates
Estimated delivery dates are provided for planning purposes only.
We are not responsible for delays caused by:
- Weather
- Carrier issues
- Labor disruptions
- Supply chain shortages
- Acts of God
- Mechanical failures
- Government actions
- Other circumstances beyond our reasonable control
Shipping delays do not entitle customers to order cancellation, refunds, chargebacks, or consequential damages.
Delivery Requirements
Someone 18 years of age or older should be available to accept delivery.
- Customers are responsible for:
- Providing accurate shipping information
- Ensuring delivery access
- Moving products indoors after delivery
- Inspecting shipments before signing
Missed deliveries or re-delivery charges may be billed to the customer.
Freight Inspection Requirements
Before signing the delivery receipt:
Customers must:
- Inspect all crates and packaging
- Look for broken boards, punctures, crushed corners, water damage, or broken glass
- Photograph the shipment before opening if damage is suspected
- Note ALL visible damage on the carrier's delivery receipt
Signing a delivery receipt without noting visible damage may limit or eliminate freight claim rights.
Concealed Damage
If concealed damage is discovered after opening:
Customers must:
- Notify us within 48 hours of delivery
- Retain all packaging materials
- Photograph the damage
- Photograph the packaging
- Provide the order number
- Cooperate with carrier inspections
Failure to preserve packaging or timely report damage may result in denial of the freight claim.
Risk of Loss
Risk of loss transfers to the customer upon delivery and acceptance of the shipment, subject to applicable law and any written agreement to the contrary.
Refused Shipments
Customers who refuse delivery of correctly manufactured and shipped products may remain responsible for:
- Original purchase price
- Original shipping charges
- Return freight
- Storage charges
- Restocking fees (where applicable)
- Collection costs
Shipping Address Changes
Requests to change the shipping address after production begins may:
- Delay shipment
- Increase shipping charges
- Require order modification
- Be unavailable depending on production status
Lost Shipments
If a shipment appears lost:
Please contact us immediately.
We will work with the carrier to investigate the shipment.
Carrier investigations may take several business days before replacement or reimbursement decisions can be made.
International Shipping
International shipping may be available upon request.
Customers are responsible for:
- Customs duties
- Import taxes
- Brokerage fees
- Local compliance requirements
International warranty service may be limited.
Order Tracking
Tracking information will be provided when available.
Freight carriers may update tracking less frequently than parcel carriers.
Customer Pickup
If local pickup is offered:
Customers must inspect products before leaving our facility.
Once products are accepted at pickup, responsibility for transportation transfers to the customer.
Force Majeure
We are not responsible for delays or failures caused by events beyond our reasonable control, including natural disasters, severe weather, labor disputes, governmental actions, pandemics, transportation disruptions, or supplier shortages.
Project Gallery
You May Also Like
Customer Reviews
Be the first to review this product!